Simple in construction and very stable in operation due to heavy top guiding,
the single seated design is the most versatile. ...
Cage Guided Valves(VDC,VDN,VSC,VSN)
Cage guided valves have the inherent advantages of capability to handle large flows of clean fluids at relatively tougher operating conditions,
smooth operation throughout the stroking range and economy of actuator selections due to reduced unbalanced force. ...
Angle Valves Top Guided (VAA,VAV,VAH) & Cage Guided (VAC,VAZ,VAN,VSA)
Designed to precisely control the fluids, angle valve has distinct advantages in piping lay-outs and is devoid of dead pockets.
The array of Internals with different designs and materials of construction results in variety of choice compatible. ...
Low and micro-flow conditions of the fluids make the proper sizing of valves extremely difficult. These valves designed to take
care of such uncertainties have the provision for series of internals with different flow co-efficients thereby enabling correct choice to meet the actual requirements. ...
Double Ported Valves (VDP)
The conventional design of these control valves enable the usage in applications involving many fluids including hydro-carbons.
The valve operation is quite steady throughout the stroke due to the relatively low unbalanced. ...
OS & Y Valve (VTT)
Out Side Screw and Yoke Manual Globe Valves with Integral seat conform to API, ASME and BS Standards.
Simple in construction and very stable in operation due to heavy top guiding. ...
Eccentric Rotary Control Valves(VFR)
The eccentric rotary control valve, model VFR called FloWing is suitable for control of higher flow capacity and slurry fluid.
It is having a straight valve body with an open yoke type plug rotating eccentrically inside. ...
Disk Stack Valves (VSD)
VSD is a control valve with a continuous resistance flow path specially designed for severe service applications. Fluid is allowed to flow through small
passages with tortuous paths to achieve pressure drop with controlled velocity. ...
High Pressure Drop Valves (VHD)
Designed and manufactured to meet the most exacting operating conditions of liquids.
Even in very high pressure drop applications the multi stage pressure reduction trim. ...
Steam Conditioning Valves (VDS)
Capable to deliver exactly the requirements of pressure reduction and desuperheating,
applications through its combined special design in a single valve. ...
Multi Stage Valves(VKD-VKD(B))
A severe service multi stage, multi path, high pressure drop, globe control valve.
Designed to eliminate the adverse effects of cavitation and flashing. ...
Mixing Service (VTM) & Diverting Service (VTD)
The most economical and appropriate selection of mixing or diverting three-way valves is called for in
applications involving two streams mixing into one or a single stream getting divided into two proportionately. ...
Clearance Type(VBW)
These valves are used for control applications where low leakage is permitted
and are suitable for use in high temperature low pressure services. ...
Soft Seated BV (VBS)
Soft seated Butterfly valves with single eccentric vane offers bubble tight leakage when fully
closed and are best suited for large flow with low differential pressure applications. ...
Safety Relief Valves
Safety Relief Valve is an automatic, pressure relieving device, actuated both by pressure and dynamic action of fluid during discharge,
suitable for use as either safety or relief valve, depending on application. ...
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
).jpg)
.jpg){kind=spacer}
.jpg)
